- COURSE OUTLINE
- SPEAKER BIO(S)
Learn a systematic approach to improving the energy efficiency of process cooling and heating systems. You will walk away with an understanding of energy-efficiency opportunities in the end uses, distribution, and primary conversion of energy for each system. Join internationally renowned and U.S. Department of Energy certified energy expert, Dr. Kelly Kissock, for a fast-paced and informative training on industrial process cooling and heating.
Participants will learn how to minimize steam-system losses through a variety of factors including better insulation, improved combustion, pressure, blow-down control, openings in conveyance and heat storage, minimizing air leakage and employing heat reclaim. Discover the importance of reducing heat gain into cold spaces and how to use heat exchangers to decrease end-use cooling loads in process cooling systems. You will understand how to employ counter-flow heat transfer to increase cooling temperature requirements and decrease energy use. The training will also cover how to model cooling tower performance and chiller-plant optimization.
As a result of this course, you will be able to:
- Identify end-use, distribution and energy conversion components of process cooling and heating systems.
- Describe energy efficiency opportunities in process cooling and heating systems.
- Repeat principles of energy efficiency that applies to both process cooling and heating systems.
- Explain the advantages of improving the performance of process cooling and heating systems.
Who should attend?
Engineers, energy managers, facility managers, power service planners, contractors, manufacturers, building owners, and anyone interested in energy efficiency cooling and heating processes.
8 a.m.: Registration and continental breakfast
8:30 a.m. - 4 p.m.: Program (lunch, breaks included)
The registration fee for attending this full-day course is $199, which includes continental breakfast and lunch. There is limited availability, so you are encouraged to register early.
Site information will be sent with your enrollment confirmation. If you have any special needs (e.g. dietary, physical), please let us know at the time of registration. All requests will be kept confidential.
Photo and video rights
We reserve the right to use photographs taken during the event for promotional purposes. Also, this program may be video taped for future publication.
Please note that in order to receive continuing education credits, you must be present for the entire training; partial credit cannot be given.
AIA Members of the American Institute of Architects will receive 6 LU/HSWs for this instructor-led face-to-face course.
BOC This course offers up to 6 points for BOC certified operators.
BOMI This course is approved for 6 continuing professional development points toward renewal of the professional designations offered by BOMI International.
This course is currently being reviewed by additional continuing education accreditation organizations. Please check back for up-to-date information.
This course will not be pre-approved for GBCI credits; however, if you believe the content is applicable to your credential, you can self-report credits.
Introduction and course overview
Energy-efficient process cooling
- Reducing end-use cooling loads and distribution energy
- Improving pumping and fan system distribution efficiency using well-controlled variable speed drives
- Maximizing cooling tower use and performance and chiller-plant optimization
Energy-efficient process heating
- Reducing steam system losses
- Insulation and improved combustion, pressure and blow-down control
- Openings in conveyance and heat storage
- Minimizing air leakage and employing heat reclaim
Kelly Kissock PhD, PE
Professor and Chair, Mechanical and Aerospace Engineering
University of Dayton
Dr. Kissock is a Professor and Chair of the Mechanical and Aerospace Engineering and Director of the Renewable and Clean Energy program at the University of Dayton. He is also Director of the University of Dayton Industrial Assessment Center and of the Ohio Lean Buildings program. He has been a research engineer at the Center for Air Pollution Impact and Trend Analysis at Washington University, the International Institute for Applied Systems Analysis in Vienna, Austria, Energy Systems Laboratory at Texas A&M University and the Center for Energy and Environmental Studies at Princeton University. He teaches graduate and undergraduate courses in thermal sciences and energy systems. Dr. Kissock was the Mechanical and Aerospace Engineering Professor of the Year in 2009 and has twice been honored with the Distinguished Educator Award by Who’s Who Among America’s Teachers. Dr. Kissock is an internationally recognized leader in energy efficiency. He has conducted over 500 industrial and building energy assessments. He is a U.S. Department of Energy Certified Energy Expert in compressed air and process heating systems.
Our education sponsors:
Interested in sponsoring an event? Contact us.
Call 608.210.7114 or email our registration contact.